Application of tire pressure monitoring in summer

We all know that the tire pressure of a car tire is related to the life of the tire. The tire pressure is too high, the elasticity is reduced, and the tire is hard, especially in hot summer, it is very easy to blow the tire. The tire pressure is too low, affecting the speed and increasing the fuel consumption. So how do you keep the tire pressure at the right level? Drivers who have not installed tire pressure monitoring can consider installing a tire pressure monitor, so that they can fully grasp the tire pressure in summer and ensure driving safety. Of course, you can also buy a tire pressure gauge to check, but the accuracy is much worse. If you find that the tire pressure is insufficient, you must make up for the specified pressure in time.

What is the tire pressure in summer?

The air pressure of the tires of different models is explained in the user manual of the vehicle. Some cars still remark the pressure range of the air pressure value of the car tires in places such as refueling. When the air pressure is insufficient, it should be replenished in time. Lose. And if possible, add inert gas. According to relevant materials, the standard air pressure of ordinary car tires is: 2.5kg for the front wheel and 2.7kg for the rear wheel in winter; 2.3kg for the front wheel and 2.5kg for the rear wheel in summer. This ensures safe driving and comfort while keeping fuel consumption to a minimum.

Generally, if we do not have proper conditions, after checking the air pressure of the tires, check whether the air valve of the car is leaking. If possible, you can use soapy water to check the diluted hand sanitizer, etc. Of course, the simple and original method , and the free method is to use your own saliva. If there is obvious enlargement or bursting after applying, you need to tighten the valve or replace it. If necessary, you should install a tire pressure monitor, perhaps a tire pressure monitoring device, to monitor tire pressure in summer. Then after the inspection, the dust cap must be screwed on to prevent dirt or water vapor from entering the air nozzle.


Post time: Oct-25-2022